Vortex Razor HD 5 - 20 x 50
Long range performer (RSR-01)
Vortex breaks new ground with the introduction of our Razor HD tactical
riflescopes. Built literally from the ground up to meet the demanding needs
of precision shooters, the all-new Razor HD 5-20x50 is a state-of-the-art
long-range performer—built on a solid 35mm one-piece tube and packed with more
than a dozen unique performance and optical features.
OPTICAL FEATURES
First Focal Plane subtensions remain consistent throughout magnification range.
APO Objective Lens System Corrects colour across the entire visual colour
spectrum—virtually eliminating chromatic aberration across the entire field of
view.
Optically Indexed Lenses Delivers optimum image sharpness and brightness with
true reticle use for full ranging and holdover from edge to edge because of
computer-controlled alignment during construction.
XD Lens Elements Extra-low dispersion (XD) glass enhances resolution, colour,
and contrast.
XR Lens Coatings Vortex XR proprietary anti-reflection lens coatings increase
light transmission with multiple coatings on all air-to-glass surfaces.
CONSTRUCTION
FEATURES
35 mm Tube Provides more internal room to accommodate a greater range of windage
and elevation adjustment to accurately dial longer-range shots.
One-Piece Tube Maximizes alignment for improved accuracy and optimum visual
performance as well as strength and waterproofness. aircraft-grade aluminium
delivers increased strength and rigidity.
Waterproof O-ring seals prevent moisture, dust, and debris from getting inside
the tube for reliable performance in all environments.
Fog proof Filled with argon gas to inhibit internal fogging over a wide range of
temperatures.
Shockproof Lenses are locked in place, fore and aft, with machined locking rings
to remain in perfect alignment and resist impact.
Hard Anodized Finish Type-3 hard-coat anodization is durable; the low-glare
matte surface of Stealth Shadow Black helps camouflage the shooter’s position.
ArmorTek Ultra-hard, scratch-resistant coating repels oils and corrosive salts
on outer glass surfaces.
INTERNAL
MECHANISM DESIGN FEATURES
RZR Zero Stop Rapid Zero Return (RZR) feature stops the turret from dialing
below sight in range using rugged steel components.
Internal mechanisms stay free of sand, dirt, dust, moisture and other foreign
materials—even when setting the zero-stop position.
RZR Tall Uncapped Turrets Spin quickly and stop at the zero setting without
counting clicks. Subtension marks match the reticle making range calculation and
shooting adjustments fast and accurate.
First Focal Plane Reticle Scale of reticle remains in proportion to the zoomed
image. Constant subtensions allow accurate holdover and ranging at all
magnifications—no shift in point of impact during zoom.
Friction Reduction System Provides superior durability, repeatability and
accuracy for the life of the product. Prevents galling or deformation of the
erector screw contact point because the heat-treated, hardened-steel pad floats
on the end of the turret screw and interfaces with a hardened steel ring on the
erector tube for steel-on-steel contact.
Turret Screws Provides low-friction, wear-resistant performance:
precision-machined from a silicon-brass alloy and treated with an advanced
dry-film lubricant. Turret screw threads are ultra-precision machined to sub-2
micron tolerances (less than 78-millionths of an inch). Ultra-smooth operation
and adjustments.
Erector Tube System Precision-machined from premium brass alloy with
anti-galling properties for great strength and durability. The erector spring of
chromium vanadium withstands compression, has high fatigue resistance, and is
tumble-polished to a mirror finish for micro-precise elevation and windage
adjustments.
Single Spring Construction Fully constrains (without over-constraining) the
optical system for predictable, improved accuracy throughout the range of
elevation adjustment.
Glass-etched Reticle Protected between two layers of glass (not made from wire)
for optimum durability and reliability.
Illuminated Reticle Electronic illumination aids in low light visibility of
reticle. Battery included.
Illumination Control Can be turned on or off with a single click between each
intensity level—allowing access to a preferred illumination setting without
having to progress through each intensity level. Positioned at 45 degrees off
the left side of the eyepiece for easy adjustment without blocking view of the
turret setting or magnification.
CONVENIENCE
FEATURES
Mag View Bar Combines a fibre optics magnification indicator with raised
rear-facing magnification references for clear viewing in low light conditions.
Patent pending.
Radius Bar Fibre optic turret rotation indicator provides illuminated and
tactile point of reference for turret rotations. Patent pending.
Fast Focus Eyepiece Allows quick and easy reticle focusing.
Side Parallax Uses an adjustment mechanism on the left side of the riflescope to
fine-tune focus to eliminate parallax shooting error.
Sunshade Reduces glare and sun reflection off the objective lens.
Bubble Level Promotes consistent shooting form for optimal accuracy.
ARD Flip Cap Cover Reduces glare and sun reflection off the objective lens. 2 mm
Hex Wrench Used for setting the RZR Zero Stop.
SPECIFICATIONS
Magnification - 5-20 x
Objective Lens Diameter - 50 mm
Eye Relief - 3.9 inches
Field of View - 13.6-5.2 feet/100 yards
Tube Size - 35 mm
Turret Style -Tall Uncapped RZR Zero Stop
Adjustment Graduation - .1 mrad
Max Elevation Adjustment - 36 mrads
Available :
EBR-1 MOA Reticle
Hashmarked ranging reticle using MOA based subtension lines for ranging,
holdover, and windage corrections.
EBR-3 MRAD
Reticle
Hashmarked ranging reticle using mrad based subtension lines for ranging,
holdover, and windage corrections.
